Skip to main content
    Minor — degraded performance: Locking pin to engagement issueView status
    Networking

    Guide: Check for Recent Network Changes

    2 min read

    When a device suddenly stops connecting to your network, it’s often because something changed — even small adjustments can have a big impact.
    Before diving into deeper troubleshooting, check the points below 👇

    1️⃣ Did You Change Internet Provider?

    • If you’ve switched to a new ISP, your router, modem, or login details may have changed.
    • Make sure:
      • You’re using the new Wi-Fi network name (SSID) and password.
      • Your new router is set to 2.4 GHz if your device doesn’t support 5 GHz.
      • Any previously connected devices are updated with the new network credentials.

    2️⃣ Have You Changed Router or Network Settings?

    • Check if any of the following were recently updated:
      • ✅ Wi-Fi name (SSID) or password
      • ✅ Network security settings (e.g., WPA2/WPA3)
      • ✅ IP address range, DHCP settings, or firewall rules
      • ✅ Parental controls or MAC address filters

    🔐 Even a small change — like a new password — can stop devices from reconnecting automatically.

    3️⃣ Have You Moved Your Router or Wi-Fi Extenders?

    • Changing the physical location of your router or extender can affect signal strength and coverage.
    • Make sure:
      • The router is centrally located and not blocked by thick walls or metal objects.
      • The charger or device is within good signal range.
      • If you use extenders, they’re still properly linked to the main router.

    📶 A weaker or unstable signal can cause your network to disappear or become unreliable.

    4️⃣ Did You Add or Remove Any Network Equipment?

    • Check if you recently:
      • Added a new router, mesh system, or booster
      • Removed or unplugged network equipment
      • Installed a new firewall or VPN

    🛑 Any of these changes can interrupt how your devices find and connect to the network.

    5️⃣ Other Common Network Changes

    • Firmware or software updates on your router or ISP equipment
    • Changes to power settings or scheduled reboots
    • ISP outages or maintenance

    🧭 What to Do If Something Changed

    • Update the device or charger with the new Wi-Fi name and password.
    • Reconnect or reset Wi-Fi extenders if they were moved.
    • Reboot the router, modem, and the device.
    • If unsure, contact your ISP or installer for help restoring original settings.

    💡 Tip: Even if you didn’t make changes yourself, someone else in the household or workplace might have — it’s always worth double-checking.

    ‍

    Back to Support