Adjusting Your Router to Use WPA2

If the charger indicates that your network security settings need adjusting please following the below settings.

1️⃣ Access Your Router Settings

• Open a web browser on a device already connected to your Wi-Fi.
• Enter your router’s IP address (common ones 192.168.0.1 or 192.168.1.1
• Log in using your router’s admin username and password.

Tip: If you’ve never changed this, it’s usually printed on the router.

2️⃣ Locate Wi-Fi or Wireless Security

• Look for a section called “Wireless,” “Wi-Fi Settings,” or “Wireless Security.”
• You should see options for security mode, encryption, or password.

3️⃣ Switch to WPA2

• Find “Security Mode” (sometimes called “Encryption”).
• Change it to WPA2-Personal (or WPA2-PSK).
• If there’s a WPA2/WPA3 mixed mode, that may work, but if it dosn't you will need to set to WPA2.

4️⃣ Keep or Update Your Wi-Fi Password

• You can either keep your current password (so your devices reconnect automatically) or set a new strong password.
• Save the changes.

5️⃣ Reconnect Devices if Needed

• If you changed the password or the encryption type, all devices may disconnect.
• Reconnect them using the new settings.

6️⃣ Optional: Update Router Firmware

• Check if your router has a firmware update option — this keeps security strong.

‍